2011 Model $5,895.00
Syil North America
Your North American Distributor of Syil CNC Machines, Software, and Resources
You are here:
Syil Worldwide
Products
        Kurt Vises  
Price: $487.80 USDThe D675 vise has a 7 1/2" jaw opening. The machined rail allows precision alignment. The stationary jaw features an integral key and larger fasteners that reduces deflection by 50%. Powder coat paint resists coolant-induced peeling for greater corrosion protection. Your Kurt vise is a professional tool and should be maintained. It is very important to perform regularly maintenance on your Kurt vise to assure proper operation. Improper maintenance will result in poor vise performance and may void your warranty. Daily / Weekly 1. Remove chips from surface of vise. 2. Visually inspect for chips, seals for damage and cleanliness. 3. Visually inspect for chip entrapments and remove when necessary. 4. Air-dry and apply rust inhibiting oil to the machined surface of the vise. Monthly 1. Open the vise to the maximum opening. 2. In the back of the movable jaw (handle end, center hole) loosen the socket head set screw (approx. 6 turns), with the hex key (Allen wrench) in the set-screw socket lift up and forward to pivot the jaw off of the vise bed. 3. Slide the jaw slightly toward the stationary jaw and lift up to remove the jaw from the “hook” of the nut. Note: A spherical segment (shaped as ½ of a steel ball) is inside the cavity of the movable jaw and may fall out as the jaw is removed. Take care not to lose or misplace the spherical segment. 4. Turn the movable jaw over and clean the inside cavity. Also clean the spherical segment. 5. Remove chips, clean and apply a light coat of machine oil to the machined surface of the following items: a. Nut and screw assembly (clean exposed threads on the screw), b. Bed of vise (top of “rails”) c. Inside of the vise between the center ways. Micro Tooling Package
Air Spindle
56,000 RPM BOLT ON AIR SPINDLE
Click here to Request Information and Pricing Professional Training
Did you know that Syil North America can provide professional Syil / Mach3 specific online training?
Syil North America's Online Training specializes in: New and Beginner Users Intermediate and Professional Users Training for Educational Users and Institutions Mecsoft Visualmill Training We have the capability to log on to your mill, and provide 1 on 1 training, this training can be extremely helpful to the new CNC user. This type of training can reduce the steep learning curve, machine crashes, and quick part creation. Our 1 on 1 online training rates start @ $65.00 USD per hr., though we can offer reduced packages when purchasing a machine from us. We are located in Calgary, Canada and have a full production facility. Our other business specializes in production of very small intricate parts, not limited to 2 Axis, 3 Axis, 4th Axis and full 3D profiling. Our shop can accommodate up to 1-2 students / customers, for larger training seminars we prefer to go to your location or train online. We have found this service to be very beneficial to many of our clients, as we can also in this time frame help you to set up your machines. Part Creation Contracting Syil North America also specializes in the production of programs and G code for new users, we can program the part, create the jigg plates / vice, proof the part and sell you all of the above. This allows new and moderately new users to freely purchase a Syil CNC, and immediately step into production. This can allow a new user to have less risk in the purchasing of a new machine, quickly being in production of their desired part and begin the repayment of their new machine. If you are interested in any of these services, feel free to call our head office. Tormach Tooling SystemTormach Tooling SystemThe Tormach Tooling System (TTS) brings new and unexpected features to the classic R8. Imagine a full line of low cost tool holders that can provide:
All of this is provided without any modification to to the spindle taper or expensive adaptors to install. Inspired by the dual contact geometry used in the latest generation of high end machining spindles (HSK, Big Plus, and others), TTS tool holders reference both the spindle taper and the spindle face. The unique shape provides a wider base, giving the tool holder a more rigid connection to the machine spindle. About the CNC Operator's Set CNC operations work best with one holder for each tool. An interchangeable set of tool holders, along with a means for off-line tool measurement, allows full utilization of the tool length compensation table in your CNC controller. The CNC set includes a total of 15 tool holders, a granite surface plate, tool measuring fixture, and dial height gauge. This is an outstanding value and a great way to get started with a CNC that has been retrofitted from a manual machine, or any machine that does not have an automatic tool changer. If your CNC machine supports a tool offset table but you’re not using it, then you’re not realizing the full benefit of CNC machining. The set is discounted 26% from the price of the individual pieces:
|
|||||||||||||||||||||||||
